Pinout for NUC's eDP cable

There is a eDP cable on the market for the first generation NUC, for the DE3815TYBE exactly. But regarding to the tech spec guide the connector pin out on the motherboard is the same with the 5th generation model. On the mobo you can find a JAE FI-X30SSLA-HF connector so the cable plug should be a FI-X30H or a FI-X30HL.
I ordered one and yesterday the mailman just dropped by, so let's see the cable.
Part number: INTL-EDP-FTDS

So here is the JAE FI-X30HL connector pinout:

 1 NC
 2 GND black
 3 LANE1 P black
 4 LANE1 N white
 5 GND black
 6 LANE0 P red
 7 LANE0 N white
 8 GND black
 9 AUX P blue
10 AUX N white
11 GND black
12 LCD_VCC black
13 LCD_VCC brown
14 NC
15 GND black
16 GND black
17 HPD red
18 GND black
19 GND black
20 GND black
21 GND black
22 ENABLE orange
23 PWM_DIM yellow
24 NC
25 NC
26 BKLT_PWR green
27 BKLT_PWR blue
28 BKLT_PWR purple
29 BKLT_PWR grey
30 NC

And here is the other side of the cable which should be an IPEX 20634 CABLINE-CA connector, the pinout:

 1 NC
 2 GND
 3 LANE1 P black
 4 LANE1 N white
 5 GND
 6 LANE0 P red
 7 LANE0 N white
 8 GND
 9 AUX P blue
10 AUX N white
11 GND
12 LCD_VCC black
13 LCD_VCC brown
14 NC
15 GND
16 GND
17 HPD red
18 GND
19 GND
20 GND
21 GND
22 ENABLE orange
23 PWM_DIM yellow
24 NC
25 NC
26 BKLT_PWR green
27 BKLT_PWR blue
28 BKLT_PWR purple
29 BKLT_PWR grey
30 NC

If you wondering about what happened with the lot of black wires(GND)? well it's converter into a big one.
Maybe this information is useful for someone else too.